Posted in Chickens, Woodworking

Building a Chicken Coop

I started out just wanting to build an extension run to my $50 Craigslist chicken coop.  After deciding on my design and doing the math, I realized I was going to spend a ton of money on hardware cloth.  I really don’t like working with hardware cloth.  It’s sharp, rigid and never goes where you want it to go… but it is a necessity for protecting the chickens.  I started frantically searching for chicken coop plans and thanks to, I finally found some plans that were going to work for me and not completely break the bank.  Once I knew what I was going to build and my vacation from work started, it was off to Home Depot to start stocking up on the needed wood.

With half of my needed 2×4’s in the shop I started to notch out the studs for the front wall.IMG_2141

After heading back to the Depot for my second round of 2×4’s, I got the front and back walls notched out and am ready to begin assembly, but that will have to wait till the next day… I do have to be a father too.IMG_2143

The next morning, I got the walls framed in.  The front wall is 10′ wide by 8′ tall and the back wall is 10’wide by 6′ tall.  Notching the studs is something I never would have thought of but it made this assembly so much easier.  Thanks HGTV.IMG_2145

Now to move them into place.  I attached an 8′ stud to help steady the wall.  It also made it so much easier to move since I was doing this by myself.IMG_2146

Once I got the front and back walls into place, it was time to join them with the 6′ cuts to begin framing in the side walls. Jack and Max were confused by the braces on the walls until I explained that they would go away once I knew everything was sturdy.IMG_2148

Once I had the frame standing, Jack went inside to get the chicks.  He brought them outside and placed them in their coop frame.  You would have thought that they had gone to heaven.  They are very active inside and once they were in “their yard” that activeness was multiplied by 100.  Running, jumping, trying to fly… They obviously had a great time.IMG_2149

Jack with Shiraz (his chicken) and the rest of the flock.IMG_2150

My last step on my first build day was to water seal and stain the wood.  I really didn’t want to use pressure treated wood as you never really know what chemicals have been used on the wood.  After doing a whole bunch of research, I learned that Thompson’s Water Seal is barn yard safe.  Thank goodness for that.  I picked out the Cedar Transparent water sealer/stain and went to town on the frame I had built that day.IMG_2152

The next day brought a trip to Lowes.  I decided to get my 4’x8′ pieces from there because I could have it delivered.  After I placed the order, the store called me to setup the delivery date.  Unfortunately for me, but good for Lowes business, the next available day was Thursday night, which I was busy with baseball and softball games, or the following Monday.  I changed the order to a store pickup and called my sister.  Thankfully she came to my rescue and we met at the store in the morning.  We loaded up my supplies in her Traverse and headed back to my house.  Since one of the things I bought was a ladder (so sad that I didn’t have one) I put the side roof beams on to fully stabilize the structure and allowing me to remove the support braces.  Once we were framed out and square, I cut and installed the pine plywood hen house floor.  IMG_2154

Once I had a platform to stand on if needed and a ladder, it was time to finish the roof. This part really made me nervous.  Geometry was the only math I was ever good at in school, but once I started working with angles to create a level surface, the doubts came out full force.  MEASURE TWICE…CUT ONCE.  In this picture, you’ll see Jack and Maxwell on one of their many outings to check on my progress and “WWE Wrestle” on the trampoline.IMG_2155

I went with a basic ribbed steal roof for the coop.  It was actually easier to install than I was expecting.  The plans called for the roof to be cut to certain lengths but as I had the first one set in place to be attached, I decided I really liked the overhang that I had without cutting the metal.  Audible number 1.  Jack and I are both jealous of the roof on the coop.  We love rain and storms and would love to sleep under a steel roof during a rain storm. I’m expecting to find Jack outside in the coop the next time it rains… of course, I’ll probably be there with him.IMG_2158

Now it was time to frame in the interior walls of the hen house.  I only have a finishing nail gun so  I pulled out the pocket hole jig and used pocket screws to frame in the interior walls.IMG_2160

As far as the outside walls went, I decided on a cheaper version of wood paneling.  These panels are OSB board covered with a synthetic coating.  They are much lighter and easier to handle for 1 person, plus they’re textured and colored so there is no need to paint, stain or protect.  At the same time, if I decide to paint the walls at some point, there is no prep work needed.IMG_2163IMG_2164

The next step was the horrible task of attaching the hardware cloth.  The plans called for using only 4′ height bundles, but there were several sections that were only 2′ tall.  No brainer… use 2′ tall hardware cloth.  Still a pain.IMG_2171

While attaching the hardware cloth, I removed the front wall panel that I had placed earlier.  Since I had it down to attach the cloth, I cut out the window hole then put it back up.  Cutting out a section from another piece of paneling, I finished out the front wall.IMG_2173

I had enough left with that piece to cut out the interior wall.  I saved the large section to be used later when I make the access doors for the inside wall.  IMG_2175

It was now time for the 4′ tall sections of hardware cloth.  This was even more of a pain than the 2′ tall sections… but it is on and securely attached.  I certainly didn’t skimp on staples to secure the cloth.  I would be willing to say that there is easily 500 staples holding my hardware cloth on. IMG_2176

Audible #2 – I didn’t like the design for the nesting boxes.  It had them as stacked and a storage area next to them.  I ripped out the framing for the outside wall and decided to design on my own.  Here you will see the floor framing for my nesting box design.IMG_2178

My finished design for the nesting boxes and the outside wall.IMG_2185

With the frame completely built, all that was left was to cut and attach the remaining wall pieces.  Here’s the inside wall.IMG_2186

Covering the nesting box and lower outside wall.IMG_2189

Finishing the outside wall. We are finally down to the little details… but that will have to wait till the next day.IMG_2191

I decided to put in an actual single hung, single pane window.  Of course I couldn’t find a stock window in the size of the hole I had, so I got the closest window possible and would later figure out the best way to cover the gap.IMG_2193

A roosting bar was added to the hen house to give our girls a place to sleep peacefully.  Since chickens are flat footed, a 1×1 was the perfect choice.IMG_2194

I probably could have made a door, but at this point anything that could be done for me, was going to be a benefit.  For $29 you can pick up a plain wood screen door.  The screen is easily removed so you can paint or stain the door to match your decor.  Thompson’s Water Seal back in business.  Now it looks like the rest of the wood.  We don’t have many problems with natural predators in the suburbs of Louisville, KY but you can’t take too many precautions when it comes to your flock.  A natural predator would have no issues with the mesh screen on the door so I reinforced it with it with hardware cloth just to be on the safe side.  Now as much as I dislike working with hardware cloth… I really dislike hanging doors.  Patience, Patience, Patience… and it’s hung.IMG_2197

I pulled out the section I cut out of the interior wall and simply cut it in half to make doors. I added some simple snap hinges, handles and a couple bolt locks to finish off the barn doors.  This certainly will make it easier to clean the hen house once our girls move in.IMG_2198

I started with a piano hinge for the lid to the nesting boxes but oh so quickly nixed that for the larger and easier to work with gate hinges.  Inside this box is 2 roomy nesting boxes that will hopefully have yummy fresh eggs in them sooner than later.IMG_2199

My plan to cover the unused window section  was to make a sign using some leftover fence planking I had from a coffin I built last year for my church’s “Spooky House”.  With some simple vinyl letters, we have a cute message to hang on our coop.  Now I know that the letters will probably fall off at some point and we will have to replace with paint, but I can deal with that as the time comes.IMG_2200

Here is Jack applying some anti-skid tape to the ladder into the hen house.  He was very concerned when the chickens were sliding down the ladder when he had them outside.  This wasn’t necessary, but it certainly made a kid feel better… Definitely worth $1.99.IMG_2201

Since I had an actual window on the house, why not add a window planter box and plant some flowers.  I found this simple window box at Home Depot and thought it would make a great addition to the coop.  Plus it adds a little color since I’m not going to paint the exterior walls right now.  Jack wanted to be sure I let everyone know that he nailed and hung the “Chickens at Play” sign.IMG_2202

After a long week of work, I finally have a finished coop.  In a couple of weeks, I will begin introducing our flock to the coop by putting them outside while I’m at work.  I have PVC pipe to  make a  couple feeders and a NSF bucket and 3 rod nipples to make a hung water bucket for the girls.  I’ll be putting those things in over the next couple weeks as we prepare to transition our hens to the outside world.  IMG_2203

There are many ready to assemble kits available out there… and I even have 1 that I now need to sell… but if you are even considering having a flock, take into consideration building your own coop.  Plans are abundant out on the internet.  It’s just a matter of finding what works for your flock and your budget.  A coop this size would be close to $2000 as a kit but I was able to build it for around $750.

Hope my girls love it as much as I do. Thanks for reading.




Posted in Woodworking


I don’t like to spend money on furniture and actually have spent most of my adult life using second hand or furniture from my childhood.  I’ve grown used to having a buffet in the dining room to help hold my many kitchen supplies.  Now that that is gone though, I really needed to find a suitable replacement.  Sure I could have easily bought an inexpensive piece made out of pressed wood and it would have been fine but for the same cost, I could also build something out of solid wood.  Enter my most recent project.  I’m not a designer though so this build is brought to you by

I drive a little Kia Soul.  While I can fit an amazing amount of stuff in my car, 4×8 plywood is not one of them so when I headed to Home Depot, I handed a team member my cut list and said I’m sorry.  But that is what they are there for and I think he appreciated how specific I was and how I tried to best utilize my plywood.  Thank you.


My plan was to work on this project  during my vacation week from work, but once I had the wood at home in the shop, I had to get started.  By the end of the first night, I had the main box and vertical supports put together.  This was a good stopping point and a chance to let the glue dry.


Sunday afternoon after church, I spent pretty much most of the day outside working.  Added the fixed shelves, made the front frame and attached the back.  I wasn’t planning on doing that much but since the air conditioner in the house is out, it has actually been cooler outside.


Fixed Shelves (If you have a Kreg Shelf Jig, you could certainly make them adjustable)IMG_2096

Front trim frame put together with pocket holes and screwsIMG_2098

Front trim on attached by lots of glue and pocket holes and screws.  The 2 pieces of trim not part of the main frame are attached directly to the supports.  Those supports are also 3/4″ shallower than the main box to allow for the doors to be flush.IMG_2099

Jack came out and helped me put the back on.  He really likes to use the nail gun.IMG_2100

Monday was Memorial Day and while I did work, there was enough daylight after work to get back out and work some more. This evening I cut and built the slat top and put it on.  Connecting 5 pieces of 1×4 with pocket holes and screws created a nice planked top .IMG_2111

With a whole bunch of glue (need to buy more now) and 1 3/4″ finishing nails, the top sits beautifully on the main box.IMG_2112

I also managed to get the 4 door frames built.  I wanted to sand and paint the doors before I put the Wire Cloth and hardware on.IMG_2125

On Wednesday, my normal day off, I was bound and determined to finish this project.  I set out early in the morning (again, cooler outside than inside) to get started.  I got everything sanded down nicely and then broke out the paint.  I ended up choosing a color called Greywood from Behr’s country collection.  I chose the “lowest” level of paint in their lineup in hopes that it wouldn’t completely cover up the beautiful wood grain.  It applied beautifully and exactly how I wanted it to.  I’ll certainly be using Behr paint again and again.IMG_2127

Jack again (with disposable gloves on so as to not get messy) came out to help paint.IMG_2128

After I got it all painted it was back out to the baseball fields for the night.  I tried to put the doors on when we got home but keeping peace between 2 brothers was more important.

Thursday night brought yet more rain and yet another postponed baseball game for Jack and softball game for me.  What to do next??? Go back out and finish the project.  I got the doors hardware cloth attached and hung them on the buffet.  I made 4 doors but as I was hanging the first one, I called an audible and decided to leave the outside 2 shelves as open.IMG_2131

Since this thing is made out of pine, it is a beast to lift.  Thankfully I have a young neighbor who was more than willing to help me carry it inside.  It’s a feeling of pride to build something with your own 2 hands.  I’ve built shelves, wine racks, play tables and even a rifle but this was the first real piece of furniture I’ve attempted.  I’m pleased with the way it turned out and it looks great in my dining room.IMG_2137

Thanks for reading.


Posted in Chickens

Welcome Home Girls

Every kid wants a pet.  I would give anything to have my Siberian Huskies again, but without a fenced yard and our crazy schedules, that’s not going to happen anytime soon.  Where do you find the next best answer… a backyard flock of chickens, plus the egg benefit is enough to convince me.

We have 5 little girls… all Rhode Island Reds.  The naming of the birds was interesting.  Jack was going for all red wine grape names while Max was certainly being a little more normal is his name choices.  After posting it out on Facebook about the names, we got some great suggestions.  “Finger, Licking, Good, Fried, Nugget”  Thanks all for the choices but we came down to our final naming.

Jack, Max and I introduce you to:







Marco Pollo (named by Uncle Mike)




The girls do seem to be adapting well and getting along.  Even with an odd number there doesn’t seem to be any territorial or dominant vs. runt issues yet.  They sleep like this is a big group all the time.  It’s very cute and amazing how fast they go from crazy play time to zonked out asleep.


Shiraz is showing off her new wing feathers coming in.  She’s very proud of them.IMG_2091


One afternoon as I was cleaning their brooder, I decided to take them out and introduce them to their coop. They really didn’t know what to do outside and seemed kind of lost.  After letting them explore the grass, I picked them all up and put them in the hen house to see what they would do.  Jenna and Shiraz went straight for the nesting box’s.  Hopefully that’s a good sign of egg production.


There will be so much more to come about our chickens.  They are adorable, fun and growing so fast.

Posted in Food and Beverage

Do You Like Coffee?

If you are like me, you have a strong need for coffee.  After college, I spent the next 11 years of my life in the live event industry. 10 years with a local company here in Louisville and 1 year with Dave Ramsey in Nashville.  Working in that field created a daily need for coffee.  It often was my main source of nutrition as the techs are always the first ones in and the last ones out for a show.  Once I left that world, I rejoined the fabulous world of Franchisee McDonalds.  Ironically, as their tech support, I still feel like the first one in and the last one out.

Anyway… I was so incredibly excited when McDonalds announced that they were going to sell McCafe coffee in the grocery stores.  McDonalds coffee has always been my favorite cup of coffee (sorry Starbucks and Heine Bros).  This product hit the store available as Whole Bean and Ground for $7.99 and K-Cup for $9.99.  I’ll easily spend that weekly for my coffee fix, but why??? As with anything, there has to be a cheaper way.

Doing my research, it seemed like the only way for me to save some money on coffee  was to roast my own beans.  How exactly does one do that?  I’ve never roasted coffee before and I certainly can’t afford the overly priced coffee roasters available at certain kitchen and home stores. Enter, a $10 wok and a $0.50 wooden spoon. sells bulk unroasted coffee beans.  Pricing ranges from $20 to $35 for a 5 pound burlap sack of beans.  Best yet… If you use the promo code: TODAYSAVE20 (works every day), you get 20% off your order and they always have free 2 day priority mail shipping.

So now let’s do the math.  Bags of coffee bought in the store are 14oz by weight.  That equates to a little less than 1 pound. Buying bulk is 5 pounds (or more) but we’ll use 5 pounds as our reference.

Grocery Store Coffee (under 1 pound) – $7.99  average

5 Pound Bulk Coffee –  $25.00 average

I roast about every 10 days  which is about the same amount of time it takes me to use a 14oz bag of coffee.  Buying in the grocery store, I will have spent $25.00 in 3 weeks while at the same time, by roasting my own coffee, I have 2 or more pounds to go at the end of week 3.  I’ll easily take a $15.00 or more savings on my coffee and roast my own beans.

I’ll get into how to actually roast your coffee beans and to what desired roast in another post. This one is just designed to make you think.